3
•
Short circuit protection: BK10 will automatically turn off when the output short circuit
occurred and prevent any damage
•
Reverse polarity protection : BK10 can automatically shut off when the output polarity is
reversed and without damage
SAFETY & TEMPERATURE FEATURES:
•
Never overcharge your battery
•
Output short circuit protection
•
Output overload protection: BK10 employs the use of a ‘Solid State Circuit Interrupter’
that opens under severe overload. This condition may occur if attempting to charge any
severely discharged or heavily sulfated battery. Once the Interrupter opens, the charger will
stop charging for a short period and then resume charging automatically and the yellow.
L.E.D. will be OFF, until resume charging. Overloading could be due to an external load,
remove the load condition prior to attempting to recharge the battery.
•
Reserve Battery / Overload Condition: BK10 has reverse battery and short circuit
protection. If a reverse battery condition exists (White L.E.D. will turn RED, only, while
output leads are connected backwards), simply unplug charger from AC power and properly
remake the connections as described in this manual
•
Internal over heat protection: BK10 have an internal overheat protection. The power will
be reduced of the ambient temperature is raised.
•
Corrosion-resistant output connectors
•
Output clips provided
BATTERY TYPES & CAPACITY:
•
Suits all Lead Acid Type Batteries. (Conventional, AGM & Gel)
•
12 Volt Output
•
Battery Capacity:
o
The following maximum AH capacities are to be used as a general guide only: some
batteries maybe able to handle a higher Charge Current. Check with the battery
Manufacturer when charging batteries with small capacity.
Charge Current:
1A
Battery Capacity: Charging:
2-20AH
Battery Capacity: Maintaining:
:
2-40 AH
ELECTRICAL PARTS:
Delivered with:
•
Input Cord: 183 cm VDE cord with 3PIN plug
•
Output Cord: with quick connector
•
Extend Cord: 183cm cord with battery clips
ENVIRONMENTAL CHARACTERISTICS:
