SP 2
TECHNICAL SPECIFICATIONS
SOURCE SELECTION:
Accommodates 13 sources, up to 6 of which may be
digital inputs
DIGITAL INPUTS:
4 coaxial S/PDIF (RCA), 2 of which may be assigned
to optical S/PDIF (TOSLINK)
OPTIONAL INPUT:
1 AES/EBU replaces the 2-optical inputs
STEREO ANALOG INPUTS:
6 stereo pairs (RCA)
DISCRETE 5.1 ANALOG INPUTS:
6 unbalanced (RCA) for Left, Centre, Right, Right
Surround, Left Surround, and Subwoofer
MAIN AUDIO OUTPUTS:
6 unbalanced (RCA) and 6 balanced (XLR) for
Left, Right, Centre, Right Surround, Left Surround,
and Subwoofer
+ OUTPUTS FOR 6.1/7.1
:
Left Rear, Right Rear (RCA)
AUDIO RECORD OUTPUTS:
2 stereo (RCA) pairs from any analog input
FREQUENCY RESPONSE:
20Hz to 20kHz +/- 0.25 dB THD & Noise (20Hz to
20kHz at 3V output level): Less than 0.006% in all
modes; below 0.0025% in Bypass mode.
SIGNAL-TO-NOISE RATIO:
Not less than 100dB in all modes; 110dB in Analog
Bypass Mode (Ref. 1V input, maximum gain,
22kHz bandwidth).
INPUT LEVEL:
Maximum 2 Vrms in DSP modes, 4Vrms in Bypass Mode
OUTPUT LEVEL:
8 Vrms (16 Vrms Balanced) in DSP Modes; 10 Vrms
(20 Vrms Balanced) in Bypass Mode
OUTPUT IMPEDANCE:
110 Ohms
D/A, A/D CONVERSION:
Crystal Semiconductor 24-Bit Delta-Sigma
DSP ENGINE:
Motorola
BASS MANAGEMENT:
2nd Order high-pass filter (x5), 4th Order low-pass filter;
Crossover Frequencies from 40 to 200 Hz
DISPLAY:
Two-line, 16-alphanumeric characters per line,
black-on-green
TRIGGER OUTPUTS:
One 12V on/off trigger; one 12V programmable
POWER REQUIREMENTS:
100VAC, 115VAC, and 230VAC models
REMOTE FUNCTIONS:
Power, master volume, source switching, mode switching,
mute, and trims (in test mode)
CONTROL PORT:
RS-232 (bidirectional, D9 connector) port for integration
of external control systems (AMX, Crestron, and others
using character-based protocols)
AUX. INFRARED RECEIVER INPUT:
Mini-phone jack
XLR CONFIGURATION:
Pin 1 ground, pin 2 positive, pin 3 negative
FRONT PANEL:
C–Series Silver or Black; 17” or 19” shelf mount
Custom version 19” rackmount available
WEIGHT:
Approx. 22 lbs (10 kg)
DIMENSIONS
(including rubber feet):
Shelfmount 17” or 19”x13.5”x4.5”
Custom Rackmount Faceplate 19”x13.5”x3.75”
7
