INTRODUCING
THE
SP 2 PREAMP/PROCESSOR
OUR GOAL
With the SP 2, we have sought to design an uncluttered, easy-
to-use processor/preamplifier, incorporating stereo and a full
range of surround sound capability, which delivers state-of-
the-art performance in both analog and digital formats.
PERFORMANCE WITHOUT COMPROMISE
With today’s increased clarity and dynamic range
in recordings and movie sound-tracks you need
equipment that not only equals but surpasses the
parameters of the most demanding material available.
The SP 2 preamplifier/processor is without peer in meeting
this performance challenge.
EASY TO USE
The Bryston SP 2 is the first high-end processor designed to
make home theater easy for the non-technical user. For example,
most functions are automatic, controls are well-labeled, and
there are clear unambiguous LCD and LED displays. Step-by-
step set-up menus with error messages displayed on the LCD
window, and a user-friendly, yet comprehensive user manual,
make the initial set-up simple and straightforward.
HOME THEATRE PROCESSING
In the digital mode, the SP 2 automatically detects the digital
input signal, routes the signal through the DSP module, and
adjusts to the appropriate mode. The digital circuit provides
decoding for Dolby Digital, Dolby Pro Logic IIx, DTS and
THX formats, in 5.1, 6.1 and 7.1 channels. There’s also Mono
and Stereo Down-mixing for all modes, independent Bass
Management modes for all speaker setups.
ANALOG AND DIGITAL CONTROL
The SP 2 puts you in control of a full range of input/output
options, allowing a choice of 13 sources, with 6 digital inputs
(4 - coaxial & 2 - TOSLINK; (Pro model, single AES/EBU
replaces 2 - TOSLINKS), 6 stereo analog inputs, and a set of 6
inputs for a 5.1 analog pass through. A Digital toggle button lets
you switch easily between digital and analog input signals, and
there is a built-in 24/192 D/A processor. The SP 2 provides
both unbalanced outputs (RCA) and a set of 6 true balanced
outputs (XLR) for 5.1 and stereo, each with its own discrete
class A output amplifier. Balanced signal transmission uses
common-mode rejection to prevent induced hum and
interference even with long cable runs.
2
5.1
6.1
7.1
In addition to standard 5.1 surround, the SP 2 allows for 6.1 and 7.1 modes.
