Bp 26 SERIES
TEChNICAL SpECIFICATIONS
3
FREqUENCY RESPONSE:
20Hz-20kHz +/- .05dB
MAxIMUM OUTPUT:
15 volts unbalanced, 30 volts balanced
IM OR THD:
less 0.0015% at 3 volts out
HIGH LEvEL INTENSITY:
500mV
RATED NOISE:
Ref. 500mV unbalanced input, 20-20kHz - 100dB
Ref. 1 volt balanced input 20-20kHz - 103dB
xLR:
Pin 1 ground, pin 2 positive, pin 3 negative
FEATURES:
2 pair balanced female XLR inputs
1 pair balanced male XLR outputs
5 pair RCA inputs
4 pair RCA + 1 pair phono inputs
4 pair RCA + 2 SPDIF digital inputs (BP20/25 DA only)
2 pair RCA outputs
1 tape loop
FINISH:
Silver or Black
DIMENSIONS:
19 or 17 x 2.25 x 11 inches,
48.26 or 43.18 x 5.72 x 28 cm
wt: 2 boxes, 20 lbs (9 kg) each
BP-26 DA SPECIFICATIONS:
Input Sample Rate:
16kHz to 108kHz.
Word Length:
16, 18, 20, 24 Bit
Conforms to SPDIF standard
Distortion:
Less than .002%, 20Hz-20kHz
Signal to Noise Ratio:
Greater than 100dB
Frequency Response:
20Hz-20kHz +/- .1dB
BP-26 PHONO SPECIFICATIONS:
Distortion:
Less than .005%, IM or THD, any frequency or
combination of frequencies from 20-20kHz, at rated output
or below
Rated Noise: Phono:
-80dBA referred to an input
of 5 millivolts RMS @ 1kHz
RIAA Accuracy:
Within less than +/- 0.05dB from
20-20kHz inclusive
BP-26MC PHONO SPECIFICATIONS:
Distortion:
Less than .005%, 20-20kHz, with preamplifier
driven to full rated output
Noise:
Equivalent to approximately 1000 ohm metal film
resistor (Thermal noise greater than 85dB below 0.6mV
input, unweighted)
Gain:
16.5 or 22.5dB (internally restrappable)
Frequency Response: Below 5Hz to above 30kHz, within less
than +/- 0.5dB
