Eshop:
Email:
w
w
w
.e
M
A
R
eg
.c
z
When entering the
200
range
manually
by
button for high precision low
resistance measurement, th is feature will prompt you to short the inputs for temporary
test lead resistance calibration on this range.
The fastest way is to short the leads to auto range to the
200
range, then press the
button momentarily. The display sho
Keep shorting the leads for
further 3 seconds until the display shows zero . The lead resistance is then temporarily
compensated.
The compensation value stays until the next meter power reset, and can be as high as
5 . If you need a compensation value that is higher than that, Relative Zero mode is
recommended.
Press the
button momentarily to toggle the functions. Last selectio n will be
saved as power up default for rep at measurement convenience.
