4
Approvals
This product was designed and built in accordance to RoHS directive
2002/95/EC and contains no hazardous substances as defined by this
directive.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for
Class B digital devices, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
d
Reorient or relocate the receiving antenna.
d
Increase the separation between the equipment and receiver.
d
Connect the equipment to an outlet on a different circuit from the
receiver.
d
Consult the dealer or an experienced radio/TV contractor for help.
To satisfy FCC/IC RF exposure safety requirements, a separation distance
of 8 inches (20 cm) or more should be maintained between this device
and persons. To ensure compliance, operation at closer than this distance
is not allowed.
