3
fiers offer the added benefits of having
the air continuously cleaned year-round,
and humidified during the winter season.
Ventilation
A system equipped with a heat or energy
recovery ventilator offers the advantage of
exhausting stale air from the home and
allowing fresh air in from the outdoors
while minimizing heat loss.
Zoning
Your system may also be equipped with a
zoning system which allows individual
•
•
control over the temperatures of separate
areas of your home.
Check Condensate Drain
Your heat pump system will remove
humidity from your home during the
cooling season. After a few minutes
of operation, you should be able to see
water trickle from the condensate drain
of the cooling coil. Check this occasion-
ally to be sure the drain system is not
clogged. Of course, don’t expect to see
much drainage if you live in a very dry
environment.
•
Heated Air Temperature
During the heating cycle, air from your
registers may seem cooler than you might
first expect. This is because the air is being
delivered at a higher velocity and a more
constant flow than air supplied by a con-
ventional furnace. Also, your heat pump
supplies air at 90 to 105°F instead of in
sudden bursts of hot air as with a conven-
tional furnace. The air may feel cool
because it is slightly less than your body
temperature. However, it is sufficiently
warm to keep you comfortable.
•
Fig. 2—Bryant Non-Programmable Thermostat
MODE
FAN
RESET/FILTER
RESET FILTER BUTTON
RESTARTS THE TIMER
THAT CALCULATES
THE NEXT AIR FILTER
CHANGE OR CLEANING
FAN BUTTON CHOOSES
BETWEEN ON OR AUTO
FAN OPERATION
LCD READOUT DISPLAYS
CURRENT ROOM TEMPERATURE,
DESIRED ROOM TEMPERATURE,
UNIT MODE SETTING,
AND FAN MODE SETTING
MODE BUTTON SELECTS
BETWEEN OFF, HEAT,
COOL, AUTO, AND EMERGENCY
HEAT OPERATION
UP AND DOWN
BUTTONS INCREASE
OR DECREASE THE
DESIRED TEMPERATURE
SETTINGS
Thermostat
Fig. 3—Bryant Programmable Thermostat
RESET FILTER BUTTON
RESTARTS THE TIMER
THAT CALCULATES
THE NEXT AIR FILTER
CHANGE OR CLEANING
HOLD BUTTON MAINTAINS
THE CURRENT TEMPERATURE
AND OVERRIDES PROGRAMMED
TEMPERATURE CHANGES
UNTIL RESET
SET TIME
BUTTON
FAN BUTTON CHOOSES
BETWEEN ON OR AUTO
FAN OPERATION
LCD READOUT DISPLAYS
CURRENT ROOM TEMPERATURE,
DESIRED ROOM TEMPERATURE
OR OUTDOOR TEMPERATURE,
UNIT MODE SETTING,
FAN MODE SETTING,
AND TIME OF DAY
MODE BUTTON SELECTS
BETWEEN OFF, HEAT, COOL,
AUTO, AND EMERGENCY
HEAT OPERATION
PROGRAM BUTTONS
FOR PROGRAMMING
HEATING/COOLING
CYCLES
UP AND DOWN
BUTTONS INCREASE
OR DECREASE THE
DESIRED TEMPERATURE
SETTINGS
Programmable
Thermostat
HOLD
RESET FILTER
SET TIME/TEMP
FAN
END
CHANGE DAY
MODE
PROGRAM
COPY PREVIOUS DAY
Содержание Puron Refrigerant Single Speed
Страница 7: ...7...
