Bryant IIT2-WHS-02, Руководство по установке

Страница: 10 / 36

8
INSTALLATION
There are 5 steps to install the thermostat:
Step 1 — Power Off HVAC Equipment
Step 2 — Remove Existing Thermostat
Step 3 — Install the Wi--Fi Thermostat
Step 4 — Connect the Wiring
Step 5 — Power On HVAC Equipment
Step 1. Power Off HVAC Equipment
Before disconnecting the existing thermostat, or installing the Legacy
Line Wi--Fi Thermostat, disconnect the power to the heating and air
conditioning equipment.
Step 2. Remove Existing Thermostat
Disconnect the wires to the existing thermostat and remove it from the
wall.
Step 3. Install the Legacy Line Wi--Fi Thermostat
The ideal location for the thermostat is approximately 5 ft (1.5 m) above
floor level in the main living area.
Do not install the thermostat:
d
Close to sources of heat such as incandescent lights
d
Near supply heating/cooling sources
d
In direct sunlight
d
On exterior, non--insulated or poorly insulated walls
d
In the kitchen or other areas of potentially high heat and/or hu-
midity
d
In an area that could restrict air flow