8.
Join the fixed profile (17) in the connection profile (19), do not fix with
screws yet, and use the rubber washers and ST4x30 screws to fix the pivot
door wall profile (6) to the wall. Press the screw caps over the screws, as
shown in figure 8.
8
Figure 8
9.
Install the handle (12) on the pivot door (11) as shown in figure 9 left.
10.
Erect the pivot door (11), insert the lower pivot part (15) into the bottom
rail profile (1). Hold the door vertically, insert the top pivot part (15) into
the frame then assemble the rest of the pivot as shown in figure 9.
11.
Loosen the screws in the top and bottom pivot hinges (15), align the door
(11) to ensure a smooth opening, with a watertight seal when closed. Once
this has been achieved, tighten the screws.
13
Figure 9