Brush Bandit 65XL, Инструкция по эксплуатации и каталог запасных частей

Страница: 3 / 149

Bandit
Copyright 1/10 PAGE
INTRODUCTION
The purpose of this manual is to provide the user with specifications and procedures for the operation,
maintenance and repair of this BANDIT product. As with any piece of equipment, safety should always
be a constant thought while the machine is being operated, serviced or stored. In order to highlight
this consideration, the material which addresses safety is proceeded by the following signal words:
The equipment is designed and manufactured in accordance with the latest product industry standards.
This alone does not prevent injury. It is the operator’s responsibility to use good judgement and follow
the warnings and instructions as indicated in this manual, on the machine and follow all safety standards
per ANSI and OSHA instructions.
Improper use of the product can result in severe personal injury. Personnel using the equipment
must be qualified, trained and familiar with the operating procedures as defined in this manual, prior
to operating the product.
It is the responsibility of the owner or employer to insure that the operator is trained and practices
safe operation while using and servicing the machine. It is also the owner’s responsibility to provide
and follow a regularly scheduled preventative maintenance and repair program on the product,
using only factory approved replacement parts. Any unapproved repairs or modifications may not
only damage the machine and its performance, but could result in severe personal injury. Unapproved
repairs or modifications will void warranty and eliminate manufacturer of any liability claims. Consult
the equipment manufacturer!!!
Each machine is shipped with a manual, a customer’s check sheet on the product, and any
available parts & service manuals on component parts not produced by this manufacturer. Additional
copies of these manuals and check sheets can be purchased from the manufacturer, or through the
dealer. Engine parts, service and maintenance manuals MUST be purchased through the engine
manufacturer or their dealer.
The producer of this Bandit product reserves the right to make any modifications or revisions to the
design or specifications of its machine without advance notice. The producer also reserves the right
to change machine and part prices as needed without advance notice.
INTRODUCTION & WARRANTY
WARNING
WARNING
NOTICE
Signal Word Likelihood of Occurrence
Degree of Potential
Injury or Damage
DANGER
WARNING
CAUTION
NOTICE
Will occur if warning is ignored
Can occur if warning is ignored
Will or can occur if warning is ignored
Important, but not hazard related
Severe
Severe
Minor
Minor to Severe