LED Pin Lighting
22
Power
1. Starting at the first or last light, plug the light into a standard electrical outlet. An adapter may need to be
used, but the light will support 90-240V 50/60 Hz. Refer to
Figure 13.
Figure 13
2. Plug the power cable from the light on the next lane into the power plug on the light on the previous lane.
Up to 12 lights may be connected together.
NOTE: An outlet is required for every 12 LED pin Lights.
addressiNg
operation
To turn on the controller, plug the supplied power supply into the "DC Voltage" port and make sure the switch
on the box is set to "EXT" (external power supply) not "USB" (for connecting to a computer). In order to
function properly, the controller must be set to EXT. When it is set correctly and plugged in, the light indica-
tors on the controller will light up. Refer to
Figure 14.
Figure 14
