Bruno REGAL CUB 35, Руководство оператора

Страница: 35 / 64

© 2001 BRUNO INDEPENDENT LIVING AIDS, INC.
35
[ ] Remove the phillips round head machine screws on the
upper half of the seat hinge (three on the Regal
premium seat, and two on the *Cub deluxe seat). Place
the Mounting Bracket over the seat hinge, aligning with
existing holes and replace the screws securely.
[ ] The height of the Holder Bracket is adjustable. If the
desired height is at the lowest position the set screw is
to be at the upper most hole to act as a safety stop.
The thread cutting screw can be moved to the position
desired. When the desired position is achieved the
knob on the Slide Tube Weldment should be tightened.
[ ] Install Mounting Bracket as shown with a 15" Premium
Seat and a Deluxe Seat. Note: When installing a 17"
Premium Seat the Mounting Bracket must be flipped so
the flange is closer to the center of the seat
(SEE ILLUSTRATION ABOVE).
WALKER HOLDER OPTION
INSTALLATION INSTRUCTIONS FOR REGAL PREMIUM / CUB DELUXE
*NOTE:
ON THE CUB
DELUXE SEAT THE
BACK SEAT
PADDING NEEDS TO
BE PEELED BACK TO
EXPOSE THE
BRACKETS.
MOUNTING BRACKET ON A 17" SEAT
ADJUSTING THE HEIGHT
MOUNTING WALKER HOLDER ON PREMIUM SEAT