Bruno REGAL CUB 35, Руководство оператора

Страница: 18 / 64

© 2001 BRUNO INDEPENDENT LIVING AIDS, INC.
18
BATTERY INFORMATION
5 AMP INTERACTER BATTERY CHARGER FUSE REPLACEMENT:
4. Plug the charger into the wall outlet. The red “power
On” indicator will light.
5. The yellow “charging” light on the charger will light.
6. When the batteries are fully charged, and the green
light is on, unplug the charger from the wall outlet,
and disconnect the charger from the scooter. Although
this charger will automatically shut down when the
batteries are fully charged, for safety's sake, the
charger should not be left on for a period of time
longer than is needed to fully charge the batteries.
Batteries which are in good condition can normally be re-
charged in approximately 6 hours.
NOTE: The optional 5 AMP INTERACTER charger can
charge any sealed, gel and starved electrolyte battery. It will
charge the standard battery pack in approximately 3-5 hours.
TO CHARGE YOUR BATTERIES OFF THE SCOOTER:
(The extended range package has separate instructions.)
1. Position the battery box and battery charger near an
electrical wall outlet.
2. Plug the charger into the mating plug on the battery
box.
3. Plug the charger into the wall outlet. The red
“Power On” indicator will light.
4. The yellow “Charging” light on the charger will
light.
NOTE:
If the scooter batteries are low on charge, the yellow light will
glow steadily. As the batteries are being charged, the yellow
light will begin to flash, rapidly at first, then more slowly as the
batteries acquire their charge. The batteries are fully charged
when the green light blinks slowly and steadily. NOTE: When
using the Interacter Charger, the green LED will glow
continuously when the batteries are fully charged.
If the charger is subject to a power line surge, the AC input
fuse may `BLOW' This fuse is located beneath the power
cord from the wall outlet to prevent shock hazard, to replace
fuse:
1) Remove Power Cord from wall outlet and charger socket.
2) Pull out on the fuse access panel.
3) Remove fuse.
4) Replace with the same size and type: (BUSS # GMC 4) 5 x
20mm-4AMP/125V-TIME LAG