Bruno Independent Living Aids
5
ASL-275 OPERATOR 02-03-2022
POWERCHAIRS USING HOLD-TITE
Powerchairs Using Hold-Tite Mechanism:
Loading
1 . Raise the powerchair armrests .
2 . Pull the T-handle out and turn it to the horizontal
position . Release .
3 . Rotate the pivot arm over the powerchair
seat (approx . 90 degrees) .
4 . Turn the T-handle back to the vertical position .
Release . It will click into the locked position .
5 . Flip open the switch cover .
6 . Press and hold the UP switch to raise the
platform/mobility device .
NOTE: The lift will make a ratcheting sound
when it has reached the upper stop position.
7 . Release the switch when the pivot
arm firmly
compresses the powerchair seat cushion . (It
should be difficult to insert your fingers under
the pivot arm at the edge of the cushion . See
photo at left .)
Unloading
1 .
Raise the powerchair armrests .
2 . Flip open the switch cover .
3 . Press and hold the DOWN switch to lower
the platform/mobility device .
4 . Pull the T-handle out and turn it to the
horizontal position . Release .
5. Rotate the pivot arm off the power
chair seat
(approx . 90 degrees) .
6 .
Turn the T-handle back to the vertical
position . Release . It will click into the locked
position .
7. Drive the powerchair off the platform.
8 . Press and hold the UP switch to raise the
platform and fold it in its home position .
9 . Turn the key to the OFF position .
10 . Close the keyswitch cover .
