Bruno ELECTRA-RIDE SRE-1540, Руководство по установке

Страница: 28 / 75

© 2004,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-1540 UL 06-18-2004
28
LEARNING THE REMOTE INFRARED TRANSMITTER-RESIDENTIAL
(not necessary when installing unit for the first time) R
The operating channel of the two (2) infrared transmitters
included with the SRE-1550 is pre-set at the Bruno factory.
Should it become necessary to re-learn the transmitters
(for example, if there are multiple units in the same location,
or in the event you have to replace transmitters) proceed as follows:
1) Turn off the circuit breaker.
2) Remove the carriage cover to expose the circuit board.
3) Locate the LEARN switch on the circuit board (see illustration to left).
4) On one of the IR TRANSMITTERS, remove the screw (a) securing
the back to the transmitter. [If the transmitter is mounted to a
wall, unscrew the (2) mounting bracket screws, turn the
transmitter over and remove screw (a) securing the mounting
bracket and the transmitter back.]
5) Remove the transmitter back and set aside with its screw.
6) On the TRANSMITTER circuit board, locate the switch (b)
labelled "SW".
7) Change the configuration for switches 1 and 2.
Note: There are four possible configurations:
•1 up, 2 down (default manufacturer's setting)
•1 up, 2 up
•1 down, 2 up
•1 down, 2 down
(a)
(b)
(c)
(c)
INSTALLATION