Bruno ELECTRA-RIDE SRE-1540, Руководство по установке

Страница: 23 / 75

© 2004,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®
23
SRE-1540 UL 06-18-2004
The final limit switch and actuation ramp assembly is a safety feature which enhances
the stopping capability of the Elevator. The actuation ramp is to be mounted to the side
of the rail, 1" from the top of the rail in a LEFT-HAND installation. In a RIGHT-HAND
installation the mount the ramp 8" from the top end of the rail. Tighten M6 X 10 hex
head screws on bottom of ramp.
measure the
distance from the
end of the rail to
the inside edge of
the actuation ramp
1" LH
8" RH
INSTALLATION
FINAL LIMIT SWITCH AND ACTUATION RAMP - Residential and Commercial Units
NOTE:
FAILURE TO ADJUST LIMIT SWITCHES WILL NOT
ALLOW UNIT TO CHARGE.
REVERSING CARRIAGE
The limit switches on the end of the carriages require adjustment:
• Lengthen the switch on
the upper end of the carriage.
• Shorten the switch on
the lower end of the carriage.
INSTALLATION
tighten
M6 x 10 hex
head cap screws