Brunner ray, Руководство по сборке

Страница: 15 / 20

Assembly instructions | Electrification and cabling
14 . 15
ELECTRIFICATION AND CABLING
Electrification and cabling for a ray table conference table system
Various profile boxes are available to choose from for electrifying your ray table conference table system. All models are
delivered with a 3m supply cable as standard. When cabling your ray table conference table, you can select from the
following options for guiding the cables horizontally and vertically. You can utilise a cable channel to guide the cabling
horizontally. The cable channel is available starting from a table length of 200 cm. There are various profile boxes to choose
from, as well. If you have decided to purchase an accompanying profile box, it is delivered premounted onto the cable
channel.
Guiding cables horizontally using a cable channel
ASSEMBLY STEP 1
First, hang the openings of the cable channel on the
clips of the plastic bracket inside the rail of the visible
traverse under-frame.
ASSEMBLY STEP 2
Second, swivel the open side to face the opposite rail and
press the channel with the opening through the plastic hook
of the clip in order to hook the channel on.
ASSEMBLY STEP 3
After you have mounted the cable channels on all plastic hooks, press
the cable channel downward at the respective points in order to lock it
into the correct position.
ASSEMBLY STEP 4
Slide the cable channel to the end of the narrow side in order
to lock it.