Brunner ray, Руководство по сборке

Страница: 11 / 20

Assembly instructions
10 . 11
ASSEMBLY INSTRUCTIONS
Assembly of a table system with system legs
ASSEMBLY STEP 1
Using the rubber hammer, tap the connector peg on the upper end of the leg into the designated recess in the visible
traverse under-frame intended. Screw in and tighten two of the M10 screws included in delivery using the size 6 hexagon
spanner with a torque of approx. 20 Nm.
ASSEMBLY STEP 2
Lift the table frame carefully in order to tilt it and place it on its legs.