uper
ead
lexi
Nominal Input Level: -20 dBu
Input Impedance: 1 MΩ
Nominal Output Level: -20 dBu
Output Impedance: 1 KΩ
Recommended Load Impedance: 10 kΩ o maggiore
Controls
:
ON/OFF Switch
HOTROD Switch
PRESENCE Switch
VOLUME Pot
BASS Pot
MIDDLE Pot
TREBLE Pot
GAIN Pot
Connectors
:
INPUT & OUTPUT (MONO)
AC adaptor (DC 9V)
Power Supply
:
DC 9V / 9mA
DO NOT EXCEED INDICATED VOLTAGE, POWER CIRCUIT WILL BE DAMAGED!
Size
: 100 (W) x 100 (D) x 40 (H) mm
Weight
:
250 g
Accessories
: Owner's Manual, Soft Bag, Rubber Feet
SPECIFICATIONS
SUPER LEAD PLEXI is an open sounding Overdrive/Distortion pedal.
It differs from other similar overdrives because of a wider dynamic range: picking soft
or picking hard will actually yield a more natural and wider range of distortion, without
too much compression, common of traditional diode-clipped overdrives.
SUPER LEAD PLEXI creates complex overtones without changing the inherent
sound characteristic of whatever amp and guitar you're playing through.
SUPER LEAD PLEXI accomplishes its tube-like distortion through the unusual combination
of overdriving its JFET opamp, and no hard-clipping diodes later on in the circuit.
Because of its large amount of available output volume, SUPER LEAD PLEXI works great as a booster
in front of amps. It gives you the feeling that your amp is cranked at even living room volume.
SUPER LEAD PLEXI is designed around a Class-A wired JFET and an
innovative power supply that doubles internally the 9Vdc supply.
These solutions combine high dynamic and rich overtones.
The input works nicely with all types of pickups, isolating the input from everything
coming before the SUPER LEAD PLEXI in your signal chain, and giving the pedal
more touch-sensitivity than any other pedal with transistor input buffer.
Buffered output completely isolates the the pedal from the influence of everything following
it in the signal chain and allows much more sustain, even at low distortion settings.
