Brunata BrunataNet BoxGPRS, Руководство пользователя и инструкция по установке

Страница: 5 / 16

5
Status-diodes Button Description
Turned off
Short push
If the GPRS-box is in sleep-mode the green
diode start to flash
Long push Turns on the GPRS-box
Turned on Long push Turns off the GPRS-box
Green status-diode Description
Flashing
Searching for GSM-net
1 short flash followed by a long pause
Has found GSM-net
2 short flashes followed by a long
pause
Transferring data via GPRS
Turned off
The module is either turned off or in sleep-
mode
Yellow status-diode Description
Turned on
Data is send to WebMon
Flashing
Has not found any receivers or it has not
been possible to send data to WebMon
Turned off The module is either turned off, in sleep-
mode or waiting for the next program run
After 3 – 5 minutes the GPRS-box will turn off the status diodes partly to save power
and partly to avoid drawing attention to the box if it is installed at a public place. With a
short pressure (under 1 sec.) at the button right to the status diodes you can reactivate
the diodes, and the status of the GPRS-box will be shown again. If the short pressure
does not reactivate on the status diodes, it means that the GPRS-box is turned off or
that there is no power to the box.
The GPRS-box will automatically start up when power is connected.
Diodes Push-button
ON/OFF