Brunata BrunataNet BoxGPRS, Руководство пользователя и инструкция по установке

Страница: 4 / 16

4
1.4 Text message commands
There are several commands to the GPRS-box, which can be sent to the GPRS-box by
text message. The text message must consist of the following 3 parameters divided by
a space:
<Password> <Text message command> <value>
If you leave out <value> GPRS-box will reply with the value it is programmed with.
More than one command can be sent in the same text message, you only have to write
<password> in the first line of commands:
<Password> <Text message command> <value>
<Text message command> <value>
<Text message command> <value>
<Password> has the default setting dokfaw .
Text message
command Description
uploadnow GPRS-box begins to collect new data from the receivers and
thereafter sends data to WebMon via GPRS
reboot Reboots the GPRS-box
uptime Minutes the GPRS-box has run
units A list of receivers which the GPRS-box has found
module_id The GPRS-box serial number.
meters A list of the meters the GPRS-box has found
gprs_apn
Parameters for the installation determine which apn the GPRS-
box uses when it is transmitting data.
gprs_username
gprs_password
The table below shows an example of a SMS-command
SMS-command SMS-answer
Dokfaw module_id 20999
1.5 Status diodes and ON/OFF button
At one end of the GPRS-box there are two status diodes which show the status of the
GPRS-box. To the right of the 2 status diodes there is a little push-button which can be
activated by a pencil.