Bruker SmartCooler BCU I, Руководство пользователя

Страница: 20 / 50

Transport, Packaging and Storage
20 Z33119_2_003
4.2 Inspection at Delivery
Upon receipt, immediately inspect the delivery for completeness and transport damage.
Figure 4.1: Shock sensor
Therefore check the Tilt watches on both sides of the packaging.
Proceed as follows in the event of externally apparent transport damage:
• Do not refuse delivery/receipt.
• Make notation on delivery receipt and inspect for damage.
• If damage is discovered, leave in original container and packaging and request immediate
inspection from carrier with 3 days of delivery.
Issue a complaint in respect to each defect immediately following detection. Damage
compensation claims can only be asserted within the applicable complaint deadlines.
4.3 Packaging
About Packaging
The individual packages are packaged in accordance with anticipated transport conditions.
Only environmentally friendly materials have been used in the packaging.
The packaging is intended to protect the individual components from transport damage,
corrosion and other damage prior to assembly. Therefore do not destroy the packaging and
only remove it shortly before assembly.
Handling Packaging Materials
Keep the original container and packing assembly, at least as long the warranty is valid, in
case the unit has to be returned to the factory. When the packaging material is no longer
needed dispose of it in accordance with the relevant applicable legal requirements and local
regulations.