Bruker NMR CryoFIT, Руководство по установке

Страница: 20 / 40

Inserting the Flow Cell
20 H12214_1_003
• The insert guide slots have to be rotated circa 90° relative to each other, as shown in the
figure below. Insert the insert guide into the magnet.
Figure 6.3: Inserting the Guide into the Shim Upper Part
Figure 6.4: Switching Off the Sample Lift
• Unscrew the plug on the T – piece of the VT gas at the bottom of the probe.
Do not leave it open for more than 10 minutes.
Do not disconnect the VT gas hose.
Some VT gas will escape from the opened T-piece.