BRUEL & KJAER VIBROPORT 80 Скачать руководство пользователя страница 46

Страница: 46 / 131

Translation of the Original Operating Instructions

VP-80/VP-80 E

6.1.4.2 Charging the battery via the power supply module

To charge the battery fitted in the VIBROPORT 80, use the
AC-7001 power supply module in conjunction with the AC-
1389 USB power supply splitter cable (provided in the scope
of supply).
The AC-1389 splitter cable comprises three connections:
•

USB connector

•

7-pole connector for VP-80 connection USB DEV/TRIG/
PWR

•

Low voltage connector for power supply module

Charge the VP-80:



Connect the two low voltage connectors of the power sup-
ply module and the splitter cable (AC-1389) together.



Connect the splitter cable to the VP-80 (connection USB
DEV/TRIG/PWR) using the 7-pole connector.



Insert the power supply module into a socket.



The VIBROPORT 80 is charged. The red indicator light in-
dicates that the battery is charging.

WARNING!
Explosive atmosphere!

Do not charge the battery of the VIBROPORT 80

in potenti-

ally explosive atmospheres. The power supply module and
docking station must not be operated in Ex zones.

This can cause explosions, resulting in damage to property
and injuries.

•

Therefore only charge the battery outside potentially
explosive atmospheres.

•

Never use the power supply module and docking station in
potentially explosive atmospheres.

Содержание VIBROPORT 80




































































































































Результаты поиска

Содержание VIBROPORT 80

Отзывы:

BRUEL & KJAER VIBROPORT 80, Перевод оригинальной инструкции по эксплуатации, Страница: 46 / 131

Результаты поиска

Содержание VIBROPORT 80

Отзывы: