29
PROBLEM
POSSIBLE CAUSE
ACTION
ERROR MESSAGE ON
THE DISPLAY
PLACE CUP
No cup detected
Place cup on the magnetic drip tray (A5)
Cup sensor (A15) cannot detect the cup material
or cup color
Use another cup
Sunlight is disturbing the cup sensor (A15)
Move the machine to a spot with less direct
sunlight
The sensor cover (A15) is dirty
remove any dirt carefully with a cotton swab or
damp cloth
The sensor sensitivity is wrong
Contact customer support (see p. 30)
If the error still appears
Contact customer support (see p. 30)
NOZZLE MISSING
Silicone nozzle (A6) not detected
Re-install the silicone nozzle (see p. 24)
Silicone nozzle (A6) is broken or weak
Replace nozzle (see p. 24)
ERROR 01 or ERROR
02
Heater sensor error
Contact customer support (see p. 30)
ERROR 05 REMOVE
AND CHECK
WATERTANK
Flow meter error
Remove the water tank (A3) and (if installed)
the water filter (see p. 9). Check the tank valve
(A18) and the tank receiver (A19) for dirt and
remove any dirt carefully with a cotton swab or
toothpick. Reinstall the water tank carefully and
make sure the tank is aligned
Air in water system (can be after installing new
water filter, see p. 9)
Switch the machine off and back on. Start the
operation one more time
Water tank (A3) not installed correctly
Remove the water tank and install it again care-
fully. Push the water tank down lightly to open
the tank valve (A18) on the bottom
If the error still appears
Contact customer support (see p. 30)
English
Содержание BRU100
Страница 8: ...8 overview A7 A13 A15 A5 A8 A4 A3 A14 A1 A2 A6 A11 A9 A17 A10 A12 A16 A6 English...
Страница 38: ...38 BERSICHT A7 A13 A15 A5 A8 A4 A3 A14 A1 A2 A6 A11 A9 A17 A10 A12 A16 A6 Deutsch...
Страница 68: ...68 Aper u A7 A13 A15 A5 A8 A4 A3 A14 A1 A2 A6 A11 A9 A17 A10 A12 A16 A6 Fran ais...
Страница 98: ...98 Panoramica A7 A13 A15 A5 A8 A4 A3 A14 A1 A2 A6 A11 A9 A17 A10 A12 A16 A6 Italiano...