Copyright © BRT Systems Pte Ltd
8
LDSBus IR Blaster Datasheet Blaster Datasheet
Version 1.1
Document Reference No.: BRTSYS_000003 Clearance No.: BRTSYS#004
5.
Twist lock the front face, in a clockwise direction, to attach it to the back cover.
6.2
Swivel Mount
The swivel mount is shown in Figure 5.
Figure 5 - LDSBus IR Blaster
–
Swivel Mount
–
Top & Bottom View
Follow these steps to fix the swivel mount
–
1.
Choose the position for the wall mount and drill holes for mounting the swivel mount on the wall.
2.
Route and affix the LDSBus RJ11 cable on the wall through a buried or wall mounted conduit to
butt against the base of the swivel mount.
3.
Break off one of the three cable entry locations on the base plate for cable routing.
Cable Entry
Top View
Bottom View
