BRP SEA-DOO Search and Rescue Series 2017 Скачать руководство пользователя страница 104

Страница: 104 / 164

MAINTENANCE PROCEDURES

Inflatable Sponsons

Important Information on Sponson
Inflation

The sponsons must be inflated to the
recommended pressure at all times

SPONSON PRESSURE

MINIMUM

MAXIMUM

28 kPa (4 PSI)

41 kPa (6 PSI)

It is normal to observe changes in air
pressure of the sponsons as the fol-
lowing factors have a direct effect:

– Exterior air temperature
– Water temperature.

If there is a change in the above condi-
tions, air pressure must be rechecked.

NOTE:

Air

pressure

sponsons

should be rechecked while the wa-
tercraft is afloat; adjust if necessary,
as the temperature of the water may
be different from that of the air, which
could result in changes in air pressure.

Sponson Inflation

Remove valve cap by unscrewing it a
quarter of a turn counterclockwise.

smo2014-008-009_a

1. Valve

Check that the center plunger of the
valve is in the upright position

F03L16Y

TYPICAL

1. Valve cap removed
2. Center plunger in upright position

Using an air pump (not supplied), insert
hose end with proper adapter into the
valve.

NOTE:

If required, use the adapter

provided with the watercraft to con-
nect the air pump hose to the sponson
valve.

smo2014-008-006_a

ADAPTER PROVIDED WITH WATERCRAFT

F03L0XY

TYPICAL

1. Foot pump hose
2. Valve cap removed

102

______________

https://www.boat-manuals.com/

Содержание SEA-DOO Search and Rescue Series 2017





































































































































































Результаты поиска

Содержание SEA-DOO Search and Rescue Series 2017

Отзывы:

Бренды по названию

Популярные бренды

BRP SEA-DOO Search and Rescue Series 2017, Руководство оператора

Результаты поиска

Содержание SEA-DOO Search and Rescue Series 2017

Отзывы:

Бренды по названию

Популярные бренды