BRP Sea-Doo MOVE, Руководство оператора

Страница: 25 / 59

LAUNCHING THE PERSONAL WATERCRAFT (PWC)
1. Prepare the PWC for launching ac-
cording to the PWC manufacturer's
recommendations.
2. Remove tie-downs from stern and
trailer eyelets.
3. Disconnect lights connector.
4. Make sure the way is clear behind
the trailer (in and out of water).
5. Attach ropes to the PWC mooring
cleats and prevent them from hang-
ing.
6. Have someone guiding you and
back the vehicle until trailer reaches
the desired depth into water.
NOTE: The PWC must not float above
the bunks.
7. Hold the winch handle firmly and set
winch mechanism to "unwind".
smo2010-003-012_a
SET WINCH TO "UNWIND"
8. Unwind until PWC slides off the
trailer and floats. It may be neces-
sary to push the PWC a little.
9. Grab the ropes previously attached
to the mooring cleats.
10. Detach the PWC from the winch
strap.
11. Moor the PWC.
12. Drive the tow vehicle out of the
ramp.
13. Connect lights connector.
_______________
23