BRP SEA-DOO ADVANCED TEC 2010, Руководство пользователя

Страница: 16 / 63

TRAILER SET-UP
iCatch Housing Angle Setting
1. Loosen the iCatch housing upper
bolt.
2. Remove the iCatch housing lower
bolt.
smo2010-005-003_a
1. Upper bolt
2. Window
3. Lower front hole
4. Lower bolt (in rear hole)
3. Set angle:
3.1 Bring angle to the appropriate
setting. The setting refers to
the number visible in the win-
dow.
3.2 Lock iCatch housing in place
by inserting the bolt through
the appropriate lower hole.
NOTE: The front or rear lower
hole will be aligned with the
iCatch housing hole depending
on the setting.
3.3 Tighten nuts to
27 N•m ± 3 N•m.
iCatch Support Height Setting
1. Remove iCatch support bolts and in-
stall in the appropriate holes.
smo2010-003-020_b
1. iCatch support bolts
NOTE: The iCatch support height set-
ting refers to the lower bolt position.
Insert upper bolt just above the tongue.
smo2010-003-020_a
1. Position 1
7. Position 7
WARNING
There must be precisely 5 unused
holes between upper and lower
bolts.
2. Progressively tighten nuts in a criss-
cross pattern until support is square
with the trailer tongue. Do not
tighten yet.
3. Adjust tongue weight, refer to
TONGUE WEIGHT
below.
4. Final tightening is 8 N•m ± 1 N•m.
14
______________
https://www.boat-manuals.com/