BRP Rotax 4-TEC 150 страница 55 Скачать руководство пользователя | Manualshive

Страница: 55 / 64

background image

51



T

ROUBLESHOOTING

C

HARTS

ENGINE OVERHEATING OR IMPROPER OIL PRESSURE
(MONITORING BEEPER EMITS A CONTINUOUS BEEP)

NOTICE

If beeper emits a continuous beep, stop engine as soon as possible!

1. Check oil and coolant level.
- Refer to MAINTENANCE PROCEDURES. Refill if necessary.
2. Clogged jet pump water intake.
- Perform the JET PUMP WATER INTAKE AND IMPELLER CLEANING PROCEDURE in

SPECIAL PROCEDURES.
3. Clogged exhaust system.
- Flush exhaust system.

NOTICE

If these actions do not correct the problem, discontinue use and seek service from an

authorized

Rotax

Jet Propulsion dealer, repair shop, or person of your own choosing

for maintenance, repair, or replacement. Please refer to the US EPA EMISSION-

RELATED WARRANTY contained herein for information about warranty claims.

ENGINE LACKS ACCELERATION OR POWER

1. Jet pump water intake clogged.
- Clean. Refer to JET PUMP WATER INTAKE AND IMPELLER CLEANING PROCEDURE

in SPECIAL PROCEDURES section.
2. Damaged impeller or worn-out wear ring.
- Replace. Refer to an authorized

Rotax

4-TEC marine engine dealer.

3. Faulty supercharger or intercooler.
- Seek service from an authorized

Rotax

Jet Propulsion dealer, repair shop, or person of

your own choosing for maintenance, repair, or replacement. Please refer to the US EPA

EMISSION-RELATED WARRANTY contained herein for information about warranty claims.
4. Supercharger clutch slipping.
- Seek service from an authorized

Rotax

Jet Propulsion dealer, repair shop, or person of

your own choosing for maintenance, repair, or replacement. Please refer to the US EPA

EMISSION-RELATED WARRANTY contained herein for information about warranty claims.
5. Weak spark.
- Refer to ENGINE MISFIRES, RUNS IRREGULARY in this section.
6. Engine management system fault detected (check if engine pilot lamp is ON).
- Seek service from an authorized

Rotax

Jet Propulsion dealer, repair shop, or person of

your own choosing for maintenance, repair, or replacement. Please refer to the US EPA

EMISSION-RELATED WARRANTY contained herein for information about warranty claims.
7. Clogged injectors.
- Seek service from an authorized

Rotax

Jet Propulsion dealer, repair shop, or person of

your own choosing for maintenance, repair, or replacement. Please refer to the US EPA

EMISSION-RELATED WARRANTY contained herein for information about warranty claims.
8. Low fuel pressure.
- Seek service from an authorized

Rotax

Jet Propulsion dealer, repair shop, or person of

your own choosing for maintenance, repair, or replacement. Please refer to the US EPA

EMISSION-RELATED WARRANTY contained herein for information about warranty claims.

«
...
53
54
55
56
57
...
»

Содержание Rotax 4-TEC 150

































































Отзывы:

Нет отзывов

Похожие инструкции для Rotax 4-TEC 150

Бренд: BAFANG Страницы: 12

Бренд: Jacobsen Страницы: 103

Бренд: Yanmar Страницы: 38

Бренд: BONFIGLIOLI Страницы: 16

Бренд: Kubota Страницы: 309

Бренд: Brother Страницы: 76

Бренд: Brother Страницы: 112

Бренд: Brother Страницы: 22

Бренд: TecumsehPower Страницы: 24

Бренд: Tecumseh Страницы: 20

Бренд: Tecumseh Страницы: 8

Бренд: SH Engines Страницы: 6

Бренд: SUHNER Страницы: 16

Бренд: Mafell Страницы: 166

Бренд: Yanmar Страницы: 164

Rexroth Brueninghaus Hydromatik A2F/6.1 Series

Бренд: Mannesmann Страницы: 20

Бренд: Mitsubishi Страницы: 61

Бренд: O.S. engine Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды