BRP Rotax 4-TEC 150 страница 23 Скачать руководство пользователя

Страница: 23 / 64

FUELING

Fuel Requirements

Alcohol fuel blending varies by country and

region. Your engine has been designed to op-

erate using the recommended fuels, however,

be aware of the following:
-Use of fuel containing alcohol above the per-

centage specified by government regulations

is not recommended and can result in the fol-

lowing problems in the fuel system compo-

nents:
• Starting and operating difficulties

• Deterioration of rubber or plastic parts

• Damage to internal engine parts

-Inspect frequently for the presence of fuel

leaks or other fuel system abnormalities if you

suspect the presence of alcohol in gasoline

exceeds the current government regulations.
– Alcohol blended fuels attract and hold mois-

ture which may lead to fuel phase separation

and can result in engine performance prob-

lems or engine damage.

Use of fuel labeled E15 is prohibited by U.S.

EPA.

¹ For optimum engine performance.

Fueling Procedure

Be very careful when fueling and adhere to

the fueling procedures described below in this

Operators Manual and those given to you by

the marina.
Know the capacity of the fuel tank. Avoid fuel-

ing at night except under well-lighted condi-

tions. Gas spills are not noticeable in the dark.

Do not carry spare fuel or flammable liquids in

any of the storage or engine compartments.

NOTICE

Always use fresh gasoline. Gasoline will

oxidize; the result is loss of octane, vola-

tile compounds, and the production of

gum and varnish deposits which can

damage the fuel system.

NOTICE

Do NOT use fuel from fuel pumps labeled

E85.

NOTICE

Never experiment with other fuels. The

us of inadequate fuel can result in boat

performance deterioration and damage

to critical parts in the fuel system and

engine components.

MINIMUM OCTANE RATING

AKI (RON+MON)/2

150 (ECT)



200 (ECT)



250 (ECT)



MINIMUM OCTANE RATING

RON

150 (ECT)



200 (ECT)



250 (ECT)





WARNING

Fuel is flammable and explosive under

certain conditions. Do not smoke or

allow open flames or sparks in the vicin-

ity.



WARNING

Follow these safe boating fueling

instructions explicitly.

Содержание Rotax 4-TEC 150

































































Результаты поиска

Содержание Rotax 4-TEC 150

Отзывы:

Похожие инструкции для Rotax 4-TEC 150

Бренды по названию

Популярные бренды

BRP Rotax 4-TEC 150, Руководство оператора

Результаты поиска

Содержание Rotax 4-TEC 150

Отзывы:

Похожие инструкции для Rotax 4-TEC 150

Бренды по названию

Популярные бренды