BRP Lynx Rave 600RS 2020 Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 188

BRP Lynx Rave 600RS 2020 Скачать руководство пользователя страница 83

SPECIAL OPERATION

Towing Another Snowmobile

If a snowmobile is disabled and must be towed use a rigid tow bar.
Remove the drive belt from disabled snowmobile, refer to

DRIVE

BELT

in

MAINTENANCE PROCEDURES

and tow at moderate speed.

NOTICE

Always remove the drive belt of the snowmobile that

is to be towed to prevent damage to its belt and drive system.

In an emergency situation only, if a rigid tow bar is not available, a
rope can be used. Proceed with extra caution. In some areas, it
may be illegal to do so. Check with state or local authorities.

Remove the drive belt, attach the rope to the ski legs (spindles), have
someone sit on the towed snowmobile to activate the brake, and tow
at low speed.

NOTICE

In order to prevent damage to the steering system,

never attach the tow rope to the ski handles.

WARNING

Never ride at high speed when towing a disabled snowmobile.
Proceed slowly with extra caution.

__________________

81

«
...
81
82
83
84
85
...
»

Содержание Lynx Rave 600RS 2020





























































































































































































Отзывы:

Нет отзывов