BRP Johnson 4HP, Руководство по обслуживанию, Страница: 71 / 185

5-5
MANUAL STARTER
REASSEMBLY
REASSEMBLY
Reassembly is the reverse order of disassembly with special
attention to the following steps.
Do not re-use the E-ring once removed. Always use a
new E-ring.
•
Secure the outer end of the recoil spring
7
on the boss in
the reel
1
and wind the spring toward the center of the
reel in a counterclockwise direction.
Because of the coiled tension in the recoil spring, wear
safety glasses and hand protection when winding or
unwinding the components.
•
Apply Triple-Guard grease to the recoil spring.

Triple-Guard grease
•
Install the reel
1
and the recoil spring to the recoil case
aligning the inner end of the spring with the boss cutaway
on the case
8
.
•
Hitch the rope
6
into the notch on the reel
1
. Rotate the
reel approximately 5 turns counterclockwise until the recoil
spring is tensioned.
NOTE:
To rotate the reel, adjust the position of the reel stopper by
hand.