BRP Evinrude E-TEC Icon Pro Series Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 156

Printed in the United States.
© 201

6

BRP US Inc. All rights reserved.

TM, ® Trademarks and registered trademarks of Bombardier Recreational Products Inc. or its affiliates.

IMPORTANT:

This User’s Guide outlines the functionality and usage of

ICON

gauges. Before using the

ICON

gauges, first read and understand all of the supplied product literature, as well as the boat’s user’s

guide and outboard’s operator’s guide. This user’s guide should be stored onboard for reference.

The photographs, illustrations, and display screens used in this guide might not depict actual models, fig-
ures, data fields, equipment, or software versions, but are intended as representative views for reference
only. The continuing accuracy of this guide cannot be guaranteed.

†

NMEA 2000

is a registered trademark of the National Marine Electronics Association or its subsidiaries.

The following trademarks are the property of Bombardier Recreational Products Inc. or its affiliates.

BRP US Inc. / Outboard Engines Division
After Sales Support
P.O. Box 597
Sturtevant, WI 53177

Evinrude

®

E-TEC

®

Evinrude

®

Johnson

®

ICON

™

Electronic Remote Control System

ICON

™

Gauge Package

S.A.F.E

.

™

(Speed Adjusting Failsafe Electronics)

«
1
2
3
4
5
...
»

Содержание Evinrude E-TEC Icon Pro Series





























































































































































Отзывы:

Нет отзывов