Brownie’s YP25DF, Руководство оператора, Страница: 13 / 46

13
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234
TORQUE VALUES AND SEQUENCING
Torque Values: Unless otherwise noted in text, the following torque values apply. All valve head screws require
torque wrench tightening.
The indicated values are for bolts in greased condition. Replace self-retaining nuts on reassembly.
Screw or Bolt Thread Max Torque
Hex and Allen Head M 6 7 ft.lbs (10 Nm)
Hex and Allen Head M 8 18 ft.lbs (25 Nm)
Hex and Allen Head M10 32 ft.lbs (45 Nm)
Hex and Allen Head M12 53 ft.lbs (75 Nm)
Hex and Allen Head M14 85 ft.lbs (120 Nm)
Hex and Allen Head M16 141 ft.lbs (200 Nm)
Pipe Connections (swivel nuts) Finger tight + ½ turn
Torque Sequencing:
Tighten valve head and cylinder bolts/nuts equally in the sequence shown here. Be sure to tighten
all parts in
cold condition only.
1
2
3
4
1
3
5
2
4
6