Brownie’s THIRD LUNG F280X Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 24

Brownie’s THIRD LUNG F280X Скачать руководство пользователя страница 20

20

9 4 0 N o r t h W e s t F i r s t S t r e e t , F o r t L a u d e r d a l e , F l o r i d a 3 3 3 1 1

Voi c e (95 4) 462 -5570

www . brown iediv e . c om

Fax (954) 462-6 115

TECHNICAL BULLETIN 050622

Changes to Valve Plate Assemblies for AC1 and AC2 Direct Drive compressor assemblies.

AC1 assemblies on F280, E150, C270, B230X-BOAT and previous single head, direct drive models.

AC2 assemblies on F390, E250, C390, CTD390, B340X-BOAT and previous dual head, direct drive models.

The following changes have been made to

Valve Plate Assemblies

for Brownie’s Third Lung direct-drive compressor

assemblies produced since June, 2005, beginning with serial number 12039.

1. Increased diameter of 4 port

holes

2. Removed material around the

outflow side of the port hole

3. Valve restraint material is now

aluminum, changed from high
temperature plastic

4. Changed flapper valve design

(see below)

These changes are designed to increase
airflow and provide greater service life of
the valve components.
The new flapper valves and restraints
are NOT backward compatible with the
previous valve plate design.
Compressors requiring service to replace
flapper valves and/or restraints will be
required to also replace the valve plate to
accommodate the new parts.

For your convenience, we have produced
a single part number for a preassembled
valve plate assembly (including the valve
plate, flapper valves, valve restraints,
screws, round o-ring, square o-ring),
AC-VPA, $55.00 each.

Revisions to Rebuild Kits

Brownie’s will now offer 2 versions of compressor head rebuild kits. One kit is required per compressor head.

BTL-DDRB1

includes cylinder sleeve, piston cup, cap screw,

2

“new design” flapper valves, 2 restraint

($65.00 FT)

screws, round o-ring, square o-ring
This set is one of multiple components included in Care Kits CK-280, CK-280R, CK-390, CK390R as of
June 15, 2005.

BTL-DDRB2

includes cylinder sleeve, piston cup, AC-VPA valve plate assembly

($104.00 FT)

This set should be sold to all customers with system serial numbers prior to 10239. After installation of
this kit, the customer can continue future services with the BTL-DDRB1.

New flapper valve shape

Previous flapper valve shape

New Valve Plate Assembly

Previous Valve Plate Assembly

«
...
18
19
20
21
22
...
»

Содержание THIRD LUNG F280X

























Отзывы:

Нет отзывов