BROWN HTS3-3620BA, Руководство владельца/оператора

Страница: 20 / 40

Operation
20
Before hitching Tree Saw to your Skid steer, make sure all safety devices are installed
on both the Tree Saw and the Skid steer.
Please follow all safety instructions and procedures.
Attach Equipment to Skid steer.
Be sure the Skid steer is equipped with the correct attachment points. Be extremely
careful when positioning skid steer for attachment to equipment. Do not allow personnel
between skid steer and equipment when positioning to attach.
Never allow anyone between the Skid steer and equipment during the
hitching process.
Be certain that the Tree Saw has been lubricated properly and check grease level in bearing block
prior to use.
Adjust Cutting Height.
Be certain that Skid steer engine is stopped, park brakes are set,
key is removed, and all rotation of the Tree Saw has ceased before
dismounting to making adjustments.
Your Brown Tree Saw is designed to cut at ground level, however for optimum blade and tip life adjust
to approximately 1” above ground level.
Herbicide Tank and Pump
Your Tree Saw is equipped with a 5 gallon spray tank and 12 volt electric pump for use with water
based herbicides. Please follow herbicide manufacturer’s directions for mixing ratios and treatment
amounts. The spray tip is adjustable from stream to mist. The pump is actuated remotely from
the cab. After the tree is cut, spray the stump to halt regrowth of the vegetation. The spray tip is
directly behind the blade, in a recessed guard.
STOP
CAUTION
WARNING