8
To start and stop the timer, press START/STOP.
To reset the timer, press CLEAR.
10.
SWITCHING OFF THE THERMOMETER
Set the POWER switch to OFF mode at the back of thermomet to switch off the base thermometer.
Set the POWER switch to OFF mode on thermometer stand to switch off the sensor.
Note:
Always drive the thermometer in the thickest part of the meat.
Avoid driving the thermometer in fatty parts of the meat.
Do not drive the thermometer into meat with bones.
Thoroughly clean the parts of the thermometer made of stainless steel after each use (with hot water and
soap).
After using do not leave the probe hanging from the grill or in the oven.
Do not put the probe directly into water or water stream.
11.
PRECAUTIONS:
Do not expose the device to strong vibrations and mechanical strain.
Avoid sudden and dramatic temperature changes (direct sunlight, low negative temperatures).
Clean the casing and the display with a soft and slightly wetted cloth.
Do not immerse the device in water.
Immediately remove used batteries from the device. Use only the type of batteries specified below.
Erroneous indications of the device (incorrect temperature values, “HHH” message) mean that the probe has been
damaged, which is why it is necessary to pay attention to using it properly:
• do not wash the probe under running water
• only the measuring element of the probe can be immersed in liquid - the cables must not come in contact with it
Not adhering to the above recommendations may lead to irreversible damage to the probe and result in voiding the
warranty.
Caution:
-
Do not put the probe into temperatures exceeding 300°C
- Do not leave the probe on the grill or inside the oven after use
- Do not insert the thermometer or probe directly into the water or under a stream of water
- Wipe the thermometer probe with a damp cloth after each use, probe wire clean by dry cloth
This symbol placed on electrical and electronic devices means that the purchased product at the end of its
working life should not be disposed together with other household waste. It should be passed to the
appropriate centre dealing with collection and disposal of electronic and electrical devices. Appropriate
disposal of the device will prevent possible negative effects in the environment and human health.
12.
TECHNICAL DATA
Thermometer / Timer:
Temperature measuring range:
0°C to 250°C (32°F to 482°F)
Tolerance/accuracy of temperature measurement < 200°C
+/-
2°C
Tolerance/accuracy of temperature measurement: > 200°C
+/-
5°C
Timer range :
max. 99 minutes and 59 seconds.
