Fire guard.
screws.
Fixing
Quartz bulbs.
DO NOT OPERATE THE APPLIANCE WITHOUT THE FIRE GUARD!
It is important that the bulbs are free of grease or finger prints as these will cause
ATTEMPTING TO FIT OR CHANGE THE BULBS!
ALWAYS ENSURE THE APPLIANCE IS ISOLATED FROM THE POWER SUPPLY BEFORE
FITTING THE QUARTZ INFRA-RED BULBS:
It will be necessary to remove the fire guard to to access the bulbs.
The bulbs are supplied in carboard tubes that are cable-tied to the inside of the fire guard.
hotspots and shorten the life of the bulb. Use gloves to handle the bulbs.
1: Remove the two fixing screws securing the fire guard with a No2 Philips screwdriver.
2: Carefully lift away the fireguard and using snips remove the cable-ties securing
the bulbs.
3: Using gloves, remove the bulbs from their packaging.
4: Fit the bulbs into the spring loaded ceramic holders at either end of the reflectors.
Ensure they are correctly seated.
5: Re-fit the fire guard.
P 5 OF 9
