Printer Setting Tool
41
3
Device settings for
Windows
®
3
Use the [
Device settings
] the “
Printer
Setting Tool
”, to change the default Tape
Creator settings.
When printing from a computer application,
various printing settings can be specified
from the printer driver; however, by using
[
Device settings
] of the “
Printer Setting
Tool
”, more advanced settings can be
specified.
When [
Device settings
] is opened, the Tape
Creator’s current settings are retrieved and
displayed. If the current settings could not be
retrieved, the previous settings are displayed.
If the current settings could not be retrieved
and previous settings have not been
specified, this tool’s default settings are
displayed.
1 Menu bar
Select a command from a list contained in a
menu. (See
2 Printer
Select the Tape Creator whose settings are to
be specified.
If only one Tape Creator is connected, it is
unnecessary to make a selection since only
that machine will appear.
3 Auto Power Off
Specify the amount of time that passes before
the machine turns off automatically.
4 Print Position Adjustment
Adjust the print position along the width of the
tape or fabric ribbon.
When the tape or fabric ribbon is installed, a
test print is performed, and the tape or fabric
ribbon is wound on the paper core. Look
through the small window of the machine at the
tape or fabric ribbon wound on the paper core
to check the print position.
5 Current Settings
Click this button to retrieve the settings from
the currently connected Tape Creator and
display them in the dialog box.
6 Exit
Exits [
Device settings
], and returns to the
main window of the “
Printer Setting Tool
”.
7 Apply
Click [
Apply
] to apply the settings to the Tape
Creator.
To save the specified settings in a command
file, select [
Save in Command File
] from the
drop-down menu.
Menu Bar
3
Select a command from a list contained in a
menu.
File Menu
3
Apply Settings to the Printer
Applies the settings to the machine.
Performs the same operation as when the
[
Apply
] button is clicked.
Save Settings in Command File
Saves the specified settings in a
command file. The saved command file
can be used with the BRAdmin utility to
apply the settings to a machine. However,
the setting for [
Print Position
Adjustment
] is not saved.
Performs the same operation as when
[
Save in Command File
] is selected from
the [
Apply
] drop-down list.
6
1
2
3
4
5
7
Содержание TP-M5000N
Страница 67: ...Printed in China LNA699001 ...