Brother TD-4650TNWB, Руководство пользователя

Страница: 69 / 73

65
10.2 RFID Error Messages
The RFID encoder can detect several errors. When these errors occur, the RFID encoder
alerts the printer and the LCD displays the appropriate error message.
Error Message Possible Cause Solution
RFID Is
Disabled
The RFID function is not
activated.
Select RFID > Control > RFID Active to enable
the RFID function.
Failure
EPC Write Failed
The EPC tag cannot be
written via Diagnostics >
Write EPC with 1s or
Write EPC with 2s
.

The label could be misaligned. Perform the
Sensor > Auto Calibration procedure to ensure
the label is at top-of-form.

Select RFID > Control > Tag Calibration > RFID
Calibrate .

Use smart labels with RFID tags located in the
correct position.

The RFID tag could be defective. Try another tag.

Make sure the application does not send too few
or too many digits to the RFID tag.
RFID Calibrate
Write Tag Failed
Tag calibration cannot be
performed.

The label could be misaligned. Perform the
Sensor > Auto Calibration procedure to ensure
the label is at top-of-form.

Use smart labels with RFID tags located in the
correct position.

The RFID tag could be defective. Try another tag.
RFID
Disabled
The RFID command is
sent to the printer when
the RFID function is
disabled.
1. Select RFID > Control > RFID Active to
enable the RFID function.
2. Then send RFID commands.
NON-RFID DATA
On RFID Tag
When the "Non- RFID
warning" option is "ON"
( RFID > Control >
Non-RFID Warning
), the
printer has obtained the
non-RFID data.
Make sure you send RFID commands to the
printer.
INVALID RFID
DATA
The RFID tag data sent
does not match the
settings.
Check the tag data of the RFID commands.
INVALID RFID
DATA LEN
The tag length size (the
size parameter of RFID
command) sent does not
match the setting.
Check the data length size of the RFID
commands.