Brother TD-4000, Руководство по обслуживанию

Страница: 93 / 139

III - 68
[ 8 ] Installing the Ground Spring and Insert Guide
(1) Insert the ground spring into the boss of the upper cover, and hang the section
"A" on the hole so that the section "B" contact the end face of the roll roller shaft.
NOTE: Set the ground spring into the boss of the upper cover surely.
(2) Assemble the insert guide onto the upper cover and secure it with the one screw.
Figure 3.5-46 Installing the Ground Spring and Insert Guide
Taptite, bind B M2.6 x 8
Ground spring
Insert guide
"A"
Hole
Boss
Rib
Roll roller shaft
Ground spring
"B"
Upper cover