SL-1110
iii
CAUTION
Sewing
This sewing machine should only be used by
operators who have received the necessary training
in safe use beforehand.
The sewing machine should not be used for any
applications other than sewing.
Be sure to wear protective goggles when using the
machine.
If goggles are not worn, there is the danger that if a
needle breaks, parts of the broken needle may
enter your eyes and injury may result.
Turn off the power switch at the following times.
The motor will keep turning even after the power is
switched off as a result of the motor’s inertia. Wait
until the motor stops fully before starting work.
The machine may operate if the treadle is
depressed by mistake, which could result in injury.
When threading the needle
When replacing the bobbin and needle
When not using the machine and when leaving
the machine unattended
If using a work table which has casters, the casters
should be secured in such a way so that they
cannot move.
Attach all safety devices before using the sewing
machine. If the machine is used without these
devices attached, injury may result.
Do not touch any of the moving parts or press any
objects against the machine while sewing, as this
may result in personal injury or damage to the
machine.
If an error occurs in machine, or if abnormal noises
or smells are noticed, immediately turn off the
power switch. Then contact your nearest Brother
dealer or a qualified technician.
If the machine develops a problem, contact your
nearest Brother dealer or a qualified technician.
Cleaning
Turn off the power switch before carrying out
cleaning.
The motor will keep turning even after the power is
switched off as a result of the motor’s inertia. Wait
until the motor stops fully before starting work.
The machine may operate if the treadle is
depressed by mistake, which could result in injury.
Be sure to wear protective goggles and gloves
when handling the lubricating oil, so that it does not
get into your eyes or onto your skin.
If care is not taken, inflammation can result.
Furthermore, do not drink the lubricating oil.
Diarrhea or vomiting may result.
Keep the oil out of the reach of children.
Use only the proper replacement parts as specified
by Brother.
Maintenance and inspection
Maintenance and inspection of the sewing machine
should only be carried out by a qualified technician.
Ask your Brother dealer or a qualified electrician to
carry out any maintenance and inspection of the
electrical system.
Turn off the power switch and disconnect the power
cord from the wall outlet at the following times.
The motor will keep turning even after the power is
switched off as a result of the motor’s inertia. Wait
until the motor stops fully before starting work.
The machine may operate if the treadle is
depressed by mistake, which could result in injury.
When carrying out inspection, adjustment and
maintenance
When replacing consumable parts such as the
rotary hook
If the power switch needs to be left on when
carrying out some adjustment, be extremely careful
to observe all safety precautions.
Secure the table so that it will not move when tilting
back the machine head. If the table moves, it may
crush your feet or cause other injuries.
Use only the proper replacement parts as specified
by Brother.
If any safety devices have been removed, be
absolutely sure to re-install them to their original
positions and check that they operate correctly
before using the machine.
Any problems in machine operation which result
from unauthorized modifications to the machine will
not be covered by the warranty.
