S-1110A
3. TABLE
4. MOTOR
2
3. TABLE
Table processing diagram
・
The top of the table should be 40 mm in thickness and should be strong enough to hold the weight and with-stand the
vibration of the sewing machine.
・
Drill holes as indicated in the illustration below.
4. MOTOR
CAUTION
All cords should be secured at least 25 mm away from any moving parts. Furthermore, do not excessively bend the
cords or secure them too firmly with staples, otherwise there is the danger that fire or electric shocks could occur.
Install the correct belt cover which corresponds to the motor being used.
< Motor >
・
Use one of the clutch motors given in the table at right as the motor.
・
Refer to the instruction manual for the motor for details on installing and
using the motor.
< Motor pulley and V-belt >
Select the correct motor pulley and V-belt by referring to the table below to suit the power frequency of your area.
50Hz 60Hz
Sewing speed
Motor pulley
(Outer diameter)
V-belt Motor
pulley
(Outer diameter)
V-belt
5,000rpm 130
45
115
44
4,000rpm 110
44
90
43
3828M
Cotton stand hole
Ground wire hole
Head rest hole
Motor mounting holes
Power Motor
Single-phase
2-pole, 400 W motor
Three-phase
2-pole, 400 W motor