Brother PocketJet PJ-673, Руководство пользователя

Страница: 42 / 75

Chapter 2
38
Selecting Paper Type
2
Paper type can be set to [ Cut Sheet ], [ Roll ],
[ Perforated Roll ] or [ Perforated Roll
Retract ].
Cut Sheet Paper
2
When using cut sheet paper, configure the
printer driver as described below.
a
Select the appropriate paper size
(Letter, A4, or Legal).
b
Set [ Paper Type ] to [ Cut Sheet ].
c
Set [ Page Feed Mode ] to [ Fixed Page ].
Non-Perforated Roll Paper
2
When using non-perforated roll paper,
configure the printer driver as described
below, depending on the desired length of
each page.
Variable-Length Pages (Saves Paper)
2
In this case, the paper size that is selected
determines the maximum number of lines per
page.
a
Select the appropriate paper size.
Letter, A4, or Legal
b
Set [ Paper Type ] to [ Roll ].
c
Set [ Page Feed Mode ] to [ No Feed ].
d
Set [ No Feed Mode Extra Feed ] to the
desired setting. Paper is ejected after
the last page of the document according
to the settings.
NOTE
When using roll paper, the end of printing
will be slightly fed out to adjust for the
roller, even if [
Page Feed Mode ] is set to
[ No Feed ] and [ No Feed Mode Extra
Feed ] is set to [ None ].
Infinite Length Pages (Such as for
Geological Recordings or Polygraph
Charts)
2
a
Set the paper size to [ Infinite ].
b
Set [ Paper Type ] to [ Roll ].
c
Set [ Page Feed Mode ] to [ No Feed ].
d
Set the desired setting to [ No Feed
Mode Extra Feed ]. Paper is ejected
after the last page of the document
according to the setting.
e
Confirm that the top and bottom margins
specified within the computer program
are set to zero (0).
Perforated Roll Paper
2
When using perforated roll paper, configure
the printer driver as described below.
a
Select the appropriate paper size.
Letter, A4, or Legal
b
Set [ Paper Type ] to [ Perforated Roll ]
or [ Perforated Roll Retract ].
c
Set [ Page Feed Mode ] to [ End of Page ]
or [ End of Page Retract ].
When [ Perforated Roll ] is selected,
paper is not fed between pages, and the
printable area for any paper size
(including custom sizes) is reduced.
When [
Perforated Roll Retract ] is
selected, paper is fed between pages,
and the printable area is the same as
when using cut sheet paper.