Brother PE-Design 8, Инструкция по эксплуатации

Страница: 127 / 269

125
Arranging Embroidery Designs (Layout & Editing)
A
rr
a
ng
in
g Embr
oide
ry
D
e
s
igns
(
L
a
y
out
& E
d
iting)
Automatically Converting an Image to an
Embroidery Pattern (Image to Stitch Wizard)
The Image to Stitch Wizard gives step-by-step instructions for converting an image into an embroidery pattern.
Toolbar button:
1.
If no image is displayed in the Design Page,
use one of the commands on the
Input sub-
menu of the Image menu to display the image.
c
“Importing Image Data” on page 120.
2.
Click Image , then Modify , and then re-size
and re-position the image for creating the
embroidery pattern.
3.
Click , or click Image , then Image to
Stitch Wizard .
→
The following dialog box appears.
1 Current image
2 Embroidery pattern after being converted
3 Type of embroidery data to be created
4 Description of the selected embroidery type
4.
Select the type of embroidery, and then click
Next .
Auto Punch :
Select this option to automatically extract the
outline for creating the embroidery pattern.
(Proceed to “
If Auto Punch is selected ”)
Photo Stitch 1 :
Select this option to automatically create a
realistic photo embroidery pattern. This option
can be used to create embroidery patterns in
color (
Color ), sepia or grayscale ( Sepia ) or
black and white ( Mono ).
(Proceed to “ If Photo Stitch 1 (Color) is
selected ”, “ If Photo Stitch 1 (Sepia) is
selected ” or “ If Photo Stitch 1 (Mono) is
selected ”)
Photo Stitch 2 :
Select this option to automatically create
realistic photo embroidery in 4 colors (
Color )
or 1 color ( Mono ).
(Proceed to “ If Photo Stitch 2 (Color) is
selected ” or “ If Photo Stitch 2 (Mono) is
selected ”)
Cross Stitch :
Select this option to create a cross stitch
pattern. This option can be used to create
embroidery patterns in color (
Color ), or sepia
or grayscale ( Sepia ).
(Proceed to “ If Cross Stitch (Color) is
selected ” or “ If Cross Stitch (Sepia) is
selected ”)
Design Center :
Select this option to start up Design Center
with the Design Page image.
(Proceed to “
If Design Center is selected ”)
a
Note:
The dialog box will not appear if no image is
displayed in the Design Page. Instead, a
dialog box appears, allowing you to open an
image file.
3
4
1
2
b
Memo:
The following types of images are appropriate
for embroidery patterns.
Auto Punch/Cross Stitch/Design Center
• Images with few and distinct colors
Photo Stitch
• Photos where the subject to be
embroidered appears clearly
• Portraits should be resized so that the
size of the face is at least 100 × 100
mm (4 × 4 inches).
• Photos that are bright and sharp