manualshive.com logo in svg

Brother PE-DESIGN 2.0, Инструкция по эксплуатации, Страница: 80 / 200

Поделиться
Скачать
Brother PE-DESIGN 2.0 Скачать руководство пользователя страница 80

70

Contents

Bef

ore Using

Getting Star

ted

Design Center

La
y

out & Editing

File Utility

Programma

bl

e 

Stich Creator

Quic

k Ref

erence

Alphabetic Inde

x

2

The selected file opens immediately if your current Design Page is not edited.
If the current Design Page is edited, you will be asked whether you want to save the changes.

3

Depending on the stage you are currently using and the editing you did, the file to be saved is a 

*.pel

 file or a 

*.pem

 file or both.

See also:

“New”, “Save” and “Save As” in this section

■

Save

Purpose:

Saves your Design Page on the disk as a Version 2.0 file (default).
NOTE:
Saved 

*.pem

 files can be opened with Version 1.0 of this software when you select 

“PEM Version 1.0” as the File Type”. Note however that some information could be 
lost.

Shortcut key:

 + 

Toolbar:

Operation:

1

Click 

File

, then 

Save

. 

If the file already exists on the disk (the file has been saved at least once during the same stage as 
the current one), the file is saved immediately. 

2

If the file name is still 

Untitled

 or if, for any other reason, the file cannot be found on the disk, the 

application automatically switches to 

Save As

.

See also:

“Save As” below

■

Save As

Purpose:

Saves the current file under a new file name.

Shortcut key:

No shortcut key for this function

Toolbar:

No button for this function

Operation:

1

Click 

File

, then 

Save

 

As

.

A

 Save As

 dialog similar to this will display.

◆

Click 

Yes

 to save the Design Page first.

◆

Click 

No

 to abandon the Design Page.

◆

Click 

Cancel

 to do anything else (for 

example, modifying the current Design 
Page or saving it with another file name).

◆

Select the drive, the folder and type the 
file name.

•

The correct extension is automatically 
set.

◆

Click 

OK

 to save.

◆

Click 

Cancel

 to exit.

Ctrl

S

Содержание PE-DESIGN 2.0









































































































































































































Отзывы:

Нет отзывов