background image

i

Introduction

Important Notice

The contents of this document and the specifications of this product are subject to change without notice.

Brother reserves the right to make changes without notice in the specifications and materials contained 
herein and shall not be responsible for any damages (including consequential) caused by reliance on the 
materials presented, including but not limited to typographical and other errors relating to the publications.

Before using the printer and the Battery Eliminator Kit, make sure you read all the documents included with 
them for information about safety and operation.

The printer shown in the illustrations may be different from your printer.

Use the Battery Eliminator Kit only with printers that have firmware version 1.20 or later.

Symbols Used in This Guide

The following symbols are used throughout this guide:

Important Safety Instructions

CAUTION

 

Brother is not liable for damage to any equipment caused by improper installation of this equipment to any 
power source.

 

Important

• The Battery Eliminator Kit must be securely installed and NEVER installed where it may come in close 

contact with the vehicle operator or passenger.

• DO NOT use the printer while driving, otherwise this may result in property damage or personal injury.
• Ensure the power cables are correctly connected before applying power.  Incorrectly connected power 

cables can cause serious injuries and damages.

 

CAUTION

Failure to observe instructions and warnings could result in minor or moderate 
injuries.

Follow these guidelines to avoid injury.

Important

Indicates information or directions that should be followed. Ignoring them may result 
in damage or failed operations.

Note

Indicates notes that provide information or directions that can help you better 
understand the product and use it more efficiently.

Содержание PA-BEK-001CG/WR







Отзывы: