Brother P-Touch PT-H100, Руководство по обслуживанию, Страница: 51 / 81

III - 28
3.2.2 Factory Inspection Mode
This mode is for shipping inspection at factories.
Figure 3.2-1 LCD Display of Factory Inspection Mode
↑
Set shortcut key at the entry screen of each inspection mode, if you use it in the
inspection mode. Otherwise, it might not work in the process of the mode.
Key Mode
LCD display at
mode transition
Inspection
at factory
Automatically
shift
inspection to
Remarks
[1] Write Setting mode
SET H100
( Figure 3.2-1 )
All [2]
[2]
INFORMATION
mode INFO H100
( Figure 3.4-1 )
All [3]
[3]
Inspect Cassette
Sensor mode CST
( Figure 3.5-1 )
All [5]
[4] Inspect Key mode
KEY
( Figure 3.6-1 )
- -
[5] PRINT 1 mode
PRN1
( Figure 3.7-1 )
All [6]
[6] CUT mode
CUT
( Figure 3.8-1 )
All Power OFF
Impossible
printing from
here
[8] MOTOR mode
MTR
( Figure 3.9-1 )
All -
S E T H 1 0 0