Brother P-Touch PT-H100, Руководство по обслуживанию, Страница: 63 / 81

III - 40
3.8 CUT Mode ([6] key) : Perform at Production
< Figure 3.8-1 > will be displayed after completion of printing < Figure 3.7-2 >, or
pressing the [6] key.
Before this inspection, set the "12 mm PET cleaning cassette".
Since this inspection implies cleaning head before shipping, avoid PRINT from this
mode when possible.
Figure 3.8-1 Cut Indication
Display < Figure 3.8-2 > by pressing [Enter] key, and perform the tape feeding.
Figure 3.8-2 In Feeding Indication
After completion of feeding, < Figure 3.8-3 > will be displayed, and the tape will be cut.
Figure 3.8-3 Tape Cut Indication
After completion of tape cut, < Figure 3.8-4 > will be displayed.
Figure 3.8-4 Tape Cut Continue Indication
When there is no problem on feeding and cutting, press the [ON/OFF] key to turn off.
When recheck of feeding/cutting is necessary, display < Figure 3.8-2 > by pressing the
[Enter] key while < Figure 3.8-4 > is displayed. Then repeat the tape feeding and
cutting.
C U T
Fe e d i n g . . .
* When change the country spec registration to the country
except U.S., display by the language after change.
TA P E C U T
C O N T I N U E ?